NASA’s Artemis I prepares for third launch attempt
The Artemis mission, NASA’s latest project to explore the moon, has hit a couple of snags over the past few months. The planned launch of Artemis I, the first rocket to launch within the project was called off twice in one week at the beginning of September, but a new launch date of 14th November has been set.
The Artemis mission, named after the ancient Greek goddess of the moon and sister to Apollo, plans to take humans, and robots, to the lunar surface. This is for a variety of reasons including scientific research on the origins of the Earth and Moon, preparing lunar infrastructure for future missions further into our solar system, as well as expanding the economic impact of the USA. The Artemis mission’s final launch, Artemis III will take two people to the moon. This will be the first woman and the first person of colour on the lunar surface.
Artemis I, the first launch of the mission, will feature NASA’s powerful new rocket, the SLS (Space Launch System), which will take the uncrewed Orion spacecraft out of the Earth’s atmosphere. The Orion spacecraft will proceed to a lunar orbit, reaching a distance of 280,000 miles away from the Earth. That is at least the distance between Durham and London 1,120 times!
After a successful launch the Orion module will travel in space for 4-6 weeks, covering over 1 million miles before returning to Earth with a re-entry speed of 24,500 mph
The first of the launches in the Artemis mission is going to be uncrewed because this launch will be the SLS’s maiden voyage; for safety reasons, there will be no passengers. However, in lieu of the lack of astronauts within the craft, NASA engineers have fitted the cockpit with many different measurement devices to test the performance of the ship, and to compare predicted data to the actual flight data. After a successful launch, the Orion module will travel in space for 4-6 weeks, covering over 1 million miles before returning to Earth with a re-entry speed of 24,500 mph.
The Orion spacecraft also features a safety mechanism called the “launch abort system”. This mechanism allows the Orion module to detach extremely quickly from the SLS and speed away from the rocket, in case of emergency during launch. The module and astronauts inside would then proceed to splash down into the Atlantic Ocean, hopefully without a scratch.
Unfortunately, even after all the years of planning, building and developing the SLS and Orion; the planned launch of Artemis I on the 29th of August had to be called off at 08:34 EDT (13:34 BST). This was due to one of the four engines being unable to reach the required temperature during the pre-launch engine bleed. This is when some of the cryogenic propellants from the fuel tanks are pushed through the engines for them to reach the proper temperature range to start them.
The engines need to reach a temperature of minus -251°C to ensure that during launch, when the heat within the engines can reach 3300°C, they will not melt. If the engine nozzles were to melt it would cause a catastrophe!
Luckily, both sections of the vehicle were confirmed to remain in a “safe and stable configuration”, so NASA started to look for new dates to plan the next launch. They decided on the 3rd of September.
The day before the planned launch NASA’s meteorologists predicted a 60% favourable weather prediction for the 2-hour launch window, and the engineers had been working tirelessly to fix the cooling issue of the previous attempt.
The countdown started, with all preparations in full swing. The cryogenic liquid hydrogen and liquid oxygen started being fuelled into the SLS. However, disaster struck at 07:24 EDT. A leak was found within a quick disconnect cavity, an interface between the liquid hydrogen fuelling line, and the SLS rocket. Luckily the engineers were able to provide a fix to this, by warming the quick disconnect cavity they were able to reseal the seal.
Artemis III will take two people to the moon … the first woman, and the first person of colour on the lunar surface
However, this fix did not last too long. The same leak reappeared 44 minutes later. The engineers decided to go with a plan B to fix the leak. This included stopping the flow of hydrogen and using helium gas to increase the pressure on the quick disconnect cavity. Fortunately, this worked again, and the leak was fixed.
But not for long, only 13 minutes passed since the liquid hydrogen started flowing back into the SLS when the leak yet again reoccurred. The team decided on trying plan A again, warming up the quick disconnect cavity to reseat the leak. This worked, but only for 10 minutes, when the leak came back, at 10:28 EDT.
Within an hour it was decided to waive the launch of Artemis I. The rocket was rolled back to the hangar to await another opportunity for launch.
A possible reason for the leak has been found. During a phase of hydrogen loading operations, an inadvertent command was sent that caused a temporary increase of pressure within the fuel line. It is not known for certain whether this caused the issues, but the engineers are looking into it.
Even though both attempts at launching the Artemis I into space fell flat, they did give a good opportunity to practice a successful launch. Hopefully, any more launches shall be more successful in reaching the Moon, and beyond.

