Aluminium-ion battery recharges in one minute and bends

batteries

By Jennifer Hack

The desire to make batteries cheaper, safer and more efficient has been a driving force for the development of new battery technologies.

Research by a group from the Department of Chemistry at Stanford University, California, recently published in the journal Nature, is a prime example of the cutting-edge advancement of battery materials. In their report, the group present the first example of an ultrafast, rechargeable aluminium-ion based battery, which can reach full charge in under 60 seconds.

Currently most batteries used are either disposable alkaline batteries or lithium-ion batteries. Alkaline batteries are bad for the environment and despite their good performance, one of the largest problems with Li-ion batteries is their safety; they are well known for their tendency to occasionally spontaneously explode.

Aluminium is very cheap and readily available, meaning Al-ion batteries have been investigated for a number of years as a safer, nonflammable alternative to the Li-ion battery, but low discharge voltages and poor lifetimes have meant that up to now, Al-ion technologies have remained in the shadow of their Li-ion counterpart.

However, the new battery material developed by the Stanford group is the first Al-ion based material to display exceptional charge/discharge capabilities. The battery comprises an aluminium anode and a graphite cathode. The electrodes are suspended in an ionic electrolyte solution and the entirety is enclosed in a polymer casing.

Due to the liquid electrolyte solution, the battery is inflammable – the battery didn’t burn even when one of the group members attempted to drill through it!

The use of graphite as the cathode contributes towards the high conductivity and its use was another serendipitous scientific discovery; the group were initially investigating the change in conductivity of metal oxide cathodes when using small amounts of graphite particles.

An attraction of using aluminium rather than lithium is the potential for a higher charge storage capacity. Whereas lithium can only release one electron per atom to form Li+, aluminium can lose up to three electrons to form ions with a +3 charge, thus allowing for higher charge storage. Furthermore, this new prototypic battery outperforms previous aluminium-ion based batteries by delivering up to 2.25 V of power versus 0.55 V for earlier Al-ion batteries and 1.5 V for a standard AA battery.

Another advantage of this new Al-ion battery is the ultrafast rate with which it can recharge. It was found that the battery can be fully charged in less than one minute. The battery also has an exceptional lifetime and can be charged and discharged up to 7,500 times, whereas Li-ion batteries have a typical charge/discharge lifetime of 1,000 cycles.

In terms of applications, the team imagine that this exceptional new technology will be suitable for a wide range of uses, from small handheld electronic devices like smart phones and tablets, to use in large-scale energy grids.

And finally, due to the polymeric pouch and liquid electrolyte, the battery is flexible and can be bent and even folded. Samsung have already recently released a flexible smartphone with a bendy screen, so it isn’t hard to imagine that before long we’ll be able to fold up our smartphones and tablets entirely!

Photograph: Rob Nunn on Flickr